How To Improve The Service Life Of Medium Efficiency Pocket Filters

To extend the service life of Medium Efficiency Pocket Filters, you can start from three aspects: correct use, regular maintenance, and reasonable selection. When using, make sure that the system air volume does not exceed the rated air volume of the filter to avoid premature damage to the filter bag due to overload operation. At the same time, try to keep the pressure difference before and after the filter stable. If the resistance is abnormally increased, check it in time to prevent the filter bag from being broken by excessive pressure.
Daily maintenance is also critical. Check the sealing of the filter regularly and repair the air leak in time to prevent unfiltered air from directly entering the system and increasing the burden on the filter bag. Also pay attention to the operating environment. In dusty or humid environments, shorten the inspection frequency. If there is too much dust on the surface of the filter bag, you can carefully remove it and use low-pressure compressed air to blow it from the inside of the filter bag to the outside, but pay attention to the strength to prevent damage to the filter material.
In addition, it is also important to choose the right Medium Efficiency Pocket Filter according to actual needs. If the dust concentration in the use environment is high, you can choose a model with a large dust holding capacity; in an environment with corrosive gases, use filter bags made of corrosion-resistant materials to reduce losses from the source and extend the service life.