Different Efficiency Representation Methods For Air Filters

When the dust concentration in the filtered gas is expressed as the weight concentration, the efficiency is the weight efficiency;
When expressed in terms of counting concentration, the efficiency is the counting efficiency; When expressed relative to other physical quantities, it is referred to as colorimetric efficiency or turbidity efficiency.
The commonly used representation method is to use the dust particle concentration in the inlet and outlet airflow of the filter to represent the counting efficiency.
At rated air volume, according to the national standards GB/T14295-93 "Air Filters" and GB13554-92 "High Efficiency Air Filters", the efficiency ranges of different filters are as follows:
Coarse efficiency filter, for particles ≥ 5 μ m, filtration efficiency 80>E ≥ 20, initial resistance ≤ 50Pa
Medium efficiency filter, for particles ≥ 1 μ m, filtration efficiency 70>E ≥ 20, initial resistance ≤ 80Pa
High efficiency filter, for particles ≥ 1 μ m, filtration efficiency 99>E ≥ 70, initial resistance ≤ 100Pa
Sub efficient filter, for particles ≥ 0.5 μ m, filtration efficiency E ≥ 95, initial resistance ≤ 120Pa
Efficient filter, for particles ≥ 0.5 μ m, filtration efficiency E ≥ 99.99, initial resistance ≤ 220Pa
Chao high-efficiency filter, for particles ≥ 0.1 μ m, filtration efficiency E ≥ 99.999, initial resistance ≤ 280Pa

2. Due to the fact that many companies now use imported filters, and their methods of expressing efficiency are different from those in China, for ease of comparison, the conversion relationship between them is listed as follows:
According to European standards, coarse filters are divided into four levels (G1~G4):
G1 efficiency for particle size ≥ 5.0 μ m, filtration efficiency E ≥ 20 (corresponding to US standard C1)
G2 efficiency for particle size ≥ 5.0 μ m, filtration efficiency 50>E ≥ 20 (corresponding to US standards C2~c4)
G3 efficiency for particle size ≥ 5.0 μ m, filtration efficiency 70>E ≥ 50 (corresponding to US standard L5)
G4 efficiency for particle size ≥ 5.0 μ m, filtration efficiency 90>E ≥ 70 (corresponding to US standard L6)
The medium efficiency filter is divided into two stages (F5~~F6):
F5 efficiency for particle size ≥ 1.0 μ m, filtration efficiency 50>E ≥ 30 (corresponding to US standards M9, M10)
F6 efficiency for particle size ≥ 1.0 μ m, filtration efficiency 80>E ≥ 50 (corresponding to American standards M11 and M12)
High efficiency filters are divided into three levels (F7~~F9):
F7 efficiency for particle size ≥ 1.0 μ m, filtration efficiency 99>E ≥ 70 (corresponding to US standard H13)
F8 efficiency for particle size ≥ 0.5 μ m, filtration efficiency 90>E ≥ 75 (corresponding to US standard H14)
F9 efficiency for particle size ≥ 0.5 μ m, filtration efficiency 99>E ≥ 90 (corresponding to US standard H15)
The sub high efficiency filter is divided into two stages (H10, H11):
H10 efficiency for particle size ≥ 0.5 μ m, filtration efficiency 99>E ≥ 95 (corresponding to US standard H15)
H11 efficiency for particle size ≥ 0.5 μ m, filtration efficiency 99.9>E ≥ 99 (corresponding to US standard H16)
High efficiency filters are divided into three levels (H12, H13, H14):
H12 efficiency for particle size ≥ 0.5 μ m, filtration efficiency E ≥ 99.9 (corresponding to US standard H16)
H13 efficiency for particle size ≥ 0.5 μ m, filtration efficiency E ≥ 99.99 (corresponding to US standard H17)
H14 efficiency for particle size ≥ 0.5 μ m, filtration efficiency E ≥ 99.999 (corresponding to US standard H18)

You Might Also Like

Send Inquiry