What should I pay attention to when installing a Partitioned HEPA Filter

When installing a Partitioned HEPA Filter, you need to pay attention to several key links. The first is the installation environment. Make sure the installation site is clean and tidy, and avoid a dusty environment. If there is a lot of dust around during installation, a lot of dust will be attached to the filter before it starts to work normally, affecting the service life and filtering effect.
Before installation, carefully check the appearance of the filter to see if the filter paper is damaged, the sealant is cracked, and the baffle is deformed. If any problems are found, it must not be installed, and a new filter must be replaced in time.
During the installation process, strictly follow the instructions. The seal between the Partitioned HEPA Filter and the mounting frame is very important. Use sealing strips or sealants to fill the gaps to ensure that there is no air leakage. If the seal is not good, unfiltered air will drill through the gap, resulting in a significant reduction in the filtering effect. After the installation is completed, check whether the filter is firmly installed to avoid loosening and displacement during operation, which affects the safety of use and filtering efficiency.