Are there requirements for the placement and installation position of Plate Type Air Filter?

Plate Type Air Filter
Plate Type Air Filter

Plate Type Air Filter cannot be placed and installed arbitrarily. Strict specifications govern installation position, placement angle and surrounding environment. Compliance of installation directly affects filtering efficiency, equipment service life and operational stability of ventilation systems. Improper installation leads to air leakage, filter failure, equipment deformation and accelerated dust accumulation. Installation must comply with industrial specifications and equipment standards.
In terms of system layout requirements, as a primary pre-filter, Plate Type Air Filter must be installed at the front air inlet of air conditioning units, fresh air units, ventilation ducts and fans. It acts as the first checkpoint for incoming air. Installation at the rear of equipment, air outlet side or the middle of pipelines is forbidden. If installed reversely, large dust particles and contaminants without pre-filtering flow directly into fans and pipelines, causing internal dust accumulation, abrasion and blockage. The pre-protection function will be completely lost, significantly shortening the service life of the whole ventilation system.
Regarding placement angle and installation techniques, the filter can be mounted vertically or horizontally according to unit structure, yet it must be flat without tilt, protrusion or suspension. It should fit tightly into clamping grooves. Sealing strips around edges ensure tight sealing to prevent air leakage along frame gaps. Tilting and poor fitting allow airflow to bypass the filter through gaps, creating numerous blind filtering zones. Most air flows without purification and filtration efficiency drops sharply. Meanwhile, the wind-facing surface of filter media must face the incoming air. Reverse installation will render the filtering structure ineffective.
When selecting installation sites, avoid high-temperature heat sources, open fire equipment and hot air outlets to prevent thermal aging and deformation of filter media and frames. Long-term damp, waterlogged and condensing areas should be avoided to stop mold growth and filter media damage. For catering and kitchen applications, prevent direct exposure to oil fume to avoid rapid solidification of grease and pore blockage. Sufficient space for disassembly, cleaning and replacement must be reserved instead of tight sealed installation to facilitate later maintenance. Moreover, the filter cannot be fitted closely against fan outlets. A buffer distance is required to prevent continuous impact of strong airflow from slackening, deforming and tearing filter media. Uniform airflow passing through the filter ensures balanced and stable filtration.
Proper installation maximizes the pre-filtering function of Plate Type Air Filter, slows dust accumulation, extends service life and guarantees ventilation efficiency. It serves as the fundamental prerequisite for long-term stable operation. All installation activities must follow position specifications, and random installation should be avoided.

You Might Also Like

Send Inquiry